| Picture |
Heading |
Updated |
 |
CFM/CMM Thermo-Anemometer with IR Temperature
Model Number: DT-8894
Brand Name: CEM
Key Specifications/Special Features:
CFM/CMM thermo-anemometer with built-in non-contact IR thermometer measure remote surface temperature to 932F(500C) degree with 30:1 distance to spot sizeSimultaneous d... |
2017-11-19 |
 |
4-in-1 Multifunction Environment Meter with 4000 Count Digital LCD Display
Model Number: DT-2232
Brand Name: CEM
Key Specifications/Special Features:
4 in 1:Light meterSound level meterRelative humidity meterTemperature meterPC InterfaceAuto power off4000 counts digital LCD displayLow battery indicationAccessories: r... |
2017-11-13 |
 |
Anemometer Datalogger, with 2s to 24hrs Measuring Rate
Model Number: DT-186
Brand Name: CEM
Key Specifications/Special Features:
Features:<Alarm setup and indicationRecording and low battery indicationManual and automatic start modeUSB port for data traffic and power supplyStatus indication via... |
2017-11-13 |
 |
Non-contact Body Infrared Thermometer
Model Number: DT-608
Brand Name: CEM
Key Specifications/Special Features:
Specially designed to take the body temperature of a person regardless of room temperaturePrecise non-contact measurementsUser selectable C or FSelectable body and surfa... |
2017-11-11 |
 |
Easy-to-use Thermo-Anemometer with Large LCD and K-type Sensor
Model Number: DT-618
Brand Name: CEM
Key Specifications/Special Features:
Features:Measurement of wind velocity and temperature, holding the reading and finding the Max./MinSensitive and accurate (ultra low friction jewel bearing)Ergonomic and... |
2017-10-22 |
 |
Professional Light Meter with Datalogger Function and USB Interface
Model Number: DT-8809A
Brand Name: CEM
Key Specifications/Special Features:
Precision instrument used to measure illuminance (lux, footcandle) in the fieldMeet CIE photopic spectral responseFully cosine corrected for the angular incidence of l... |
2017-10-19 |
 |
CFM/CMM Thermo-Anemometer with NTC-Type Thermo-Resistant Temperature Sensor
Model Number: DT-619
Brand Name: CEM
Key Specifications/Special Features:
Easy to set area dimensions (up to 8 points)20 points average; max./min. record for single point Continuous moving average for up to 2 hours Data hold and max./min. hold... |
2017-10-19 |
 |
Mini AC/DC Clamp Meter with Frequency of 5Hz to 10MHz
Model Number: DT-337
Brand Name: CEM
Key Specifications/Special Features:
Designed to verify the presence of load current, voltage and resistance The small body and clamp jaw fit perfectly in your hand1mA high resolution for AC/DC current meas... |
2017-10-12 |
Friends links